Research Article 
Distribution Static Compensator Used as Custom Power Equipment and its Simulation Using PSCAD
Z.A. Zakaria, B.C. Chen, M.O. Hassan and J.X. Yuan
Information Technology Journal, 2008, 7(8), 1141-1148.
Abstract
This study addresses the transient studies of electrical networks with embedded, distribution static compensator (DSTATCOM) as example of Custom Power (CP) controllers. The transient analysis and modeling is performed with the state-of-the-art digital Simulator PSCAD/EMTDC.4.2. Simulations were carried out for both cases where, DSTATCOM was connected into the system and not, with simulation interval 0.8-1 sec. The aim of the DSTATCOM here to provide voltage regulation at the load point and mitigate the voltage sag generated when the load is increased.
ASCI-ID: 28-745
Related Articles
Development of Simulation Model in Heterogeneous Network Environment: Comparing the Accuracy of Simulation Model for Data Transfers Measurement over Wide Area Network
Information Technology Journal, 2008, 7(6), 897-903.
Dynamic Performances of Adjustable Speed AC Drives Part 2: Control and Simulation of AC MachinesInformation Technology Journal, 2002, 1(2), 106-117.
Fairness Studies of the pi-Persistent Protocol in Unidirectional Bus NetworksInformation Technology Journal, 2002, 1(3), 255-263.
Heuristic Approach to Dynamic Data Allocation in Distributed Database SystemsInformation Technology Journal, 2003, 2(3), 231-239.
Comparison of ARIMA and RBFN Models to Predict the Bank TransactionsInformation Technology Journal, 2007, 6(3), 475-477.
Angle-Aware Broadcasting Techniques for Wireless Mobile Ad Hoc NetworksInformation Technology Journal, 2008, 7(7), 972-982.
The Extended State Particle Filter for Unknown Process ModelsInformation Technology Journal, 2011, 10(3), 532-540.
Building a Dynamic RFID Data-Driven Supply Chain Management System: Imperatives and GuidelinesInformation Technology Journal, 2011, 10(4), 703-709.
A Biased Rule for Data FusionInformation Technology Journal, 2011, 10(8), 1637-1640.
Parametric Optimization of an Eight-bar Mechanism of a Wheel Loader Based on SimulationInformation Technology Journal, 2011, 10(9), 1801-1808.
A Flexible Multi-agent System Model in System SimulationInformation Technology Journal, 2011, 10(12), 2371-2377.
The Central Difference Multi-target Multi-bernoulli Filtering AlgorithmsInformation Technology Journal, 2011, 10(11), 2168-2174.
Simulation Analysis and Design for the Pressure Impulse TestInformation Technology Journal, 2012, 11(4), 532-535.
Theoretical and Experimental Research on MFCGInformation Technology Journal, 2012, 11(4), 446-450.
Production Process Scheduling Based on Simulation with Global Optimization Strategy: A Case StudyInformation Technology Journal, 2013, 12(5), 983-989.
Time Analysis for BPMN Gateways Using Queuing TheoryInformation Technology Journal, 2013, 12(9), 1772-1779.
Cloud Simulation Resource Scheduling Algorithm Based on Multi-dimension Quality of ServiceInformation Technology Journal, 2012, 11(1), 94-101.
Parameter Design and Simulation Research on Wind Vibration Sorting Device Structure of Waste PlasticsInformation Technology Journal, 2013, 12(13), 2575-2580.
Modeling and Simulation of Permanent Magnet Synchronous Motor Vector ControlInformation Technology Journal, 2014, 13(3), 578-582.
Computer Aided Design and Simulation for the Characteristics of Energy-saving Steering Pump Based on the Speed CompensationInformation Technology Journal, 2013, 12(14), 2863-2867.
Design and Simulation of Joint Valve for Petroleum Equipment UnitsInformation Technology Journal, 2013, 12(14), 2893-2896.
Simulation of Air Cargo Operations in West PACTLInformation Technology Journal, 2013, 12(15), 3179-3183.
Design and Realization on Simulation Software of Echo SounderInformation Technology Journal, 2013, 12(16), 3645-3649.
Impact Analysis Between the Individual and Group Based on Dynamic System SimulationInformation Technology Journal, 2013, 12(18), 4380-4384.
P-ILC for Output Data Dropouts and its Application in Wastewater Biological Treatment PlantInformation Technology Journal, 2013, 12(18), 4740-4743.
Functional Area Layout Method of Underground Logistic Terminal based on Genetic Algorithm and Automod Simulation PlatformInformation Technology Journal, 2013, 12(19), 4977-4984.
Simulation of Point Source Pollution Diffusion Using a Velocity Field-cellular Automata Coupled MethodInformation Technology Journal, 2013, 12(20), 5424-5431.
B2C E-commerce Vehicle Delivery Model and SimulationInformation Technology Journal, 2013, 12(20), 5891-5895.
Simulation Analysis on the Propagation Characteristics of Electromagnetic Wave for Gis Partial DischargeInformation Technology Journal, 2013, 12(21), 5987-5992.
Study on the Lapping Processes Based on Multi-elastic Unit PlateInformation Technology Journal, 2013, 12(21), 5993-5998.
Vehicles Esp Control Performances on the Two-pitman Restriction Test SystemInformation Technology Journal, 2013, 12(23), 7109-7116.
System Dynamics Modeling and Simulation for Capital-constrained Supply Chain Based on Inventory FinancingInformation Technology Journal, 2013, 12(24), 8384-8390.
Serial ALU Simulation with Timing and Signal ConstraintsInformation Technology Journal, 2006, 5(1), 198-203.
Simulation of Improved MODFET Characteristics under Backside IlluminationInformation Technology Journal, 2006, 5(3), 503-506.
Knowledge Transfer Optimization Simulation for Innovation NetworksInformation Technology Journal, 2009, 8(4), 589-594.
Using Simulation to Object-Oriented Order Picking SystemInformation Technology Journal, 2008, 7(1), 224-227.
Cited By
A New Method for Determining Voltage Sag Source Locations by using Multivariable Regression Coefficients
Journal of Applied Sciences, 2011, 11(15), 2734. DOI: 10.3923/jas.2011.2734.2743
Analytical Approaches on Optimal Placement of STATCOM Under Contingency Occasions2020 2nd International Conference on Smart Power & Internet Energy Systems (SPIES), 2020, (), 7. DOI: 10.1109/SPIES48661.2020.9243128