Search. Read. Cite.

Easy to search. Easy to read. Easy to cite with credible sources.

Research Article
The Damage of the Cutting Tools out of Carbide Metallic During the Turning of a Soaked and not Hardened Steel XC38

M. Seghouani, A. Tafraoui and S. Lebaili

Journal of Applied Sciences, 2010, 10(10), 813-822.

Abstract

The purpose of this study to widened knowledge on the use of the cutting tools out of metal carbide and to define of it the influence of the elements of the mode of cut on the behaviour of these tools during the machining of treated steel XC38 and untreated. This study aimed at evolution determined in experiments of the wear of a cutting tool out of metal carbide with plate reported of P30 nuance for an operation of slide-lathing in turning on soaked and not hardened steel XC38 test-tubes. This research is based on the model of Taylor to determine the lifespan of the cutting tool according to the various parameters of cut, like the cutting speed Vc, the advance of cut a, the depth of cutting P. In order to express the operational limits of the tool for slide-lathing in a preventive way. The model makes it possible to determine the time of change of the tool and to regard it as constraint for the respect of the roughness of the work piece during a work of series in conventional machining.

ASCI-ID: 35-3455

Cited References Fulltext

Related Articles


Analysis of Ti-base Hard Coating Performance in Machining Process: A Review

Journal of Applied Sciences, 2012, 12(18), 1882-1890.

Machining of Nickel Alloy 242 with Cubic Boron Nitride Tools

Journal of Applied Sciences, 2010, 10(19), 2322-2327.

Tool Temperature and Cutting Forces during the Machining of Particleboard and Solid Wood

Journal of Applied Sciences, 2010, 10(22), 2881-2886.

Multi-objective Optimisation of Machining Fibre Reinforced Composites

Journal of Applied Sciences, 2012, 12(23), 2360-2367.

The Wear Characteristics of Cemented Tungsten Carbide Tools in Machining Oil Palm Empty Fruit Bunch Particleboard

Journal of Applied Sciences, 2009, 9(18), 3397-3401.

Application of the Experimental Designs on the Modeling of the Combustion`s Parameters

Journal of Applied Sciences, 2006, 6(12), 2599-2604.

Friction Reduction in Compressed Natural Gas Direct Injection Engine using Piston Rings with Diffusion Chromium Coating

Journal of Applied Sciences, 2010, 10(6), 462-470.

Investigation of Worn Surface Characteristics of Steel Influenced by Jatropha Oil as Lubricant and Eco-friendly Lubricant Substituent

Journal of Applied Sciences, 2011, 11(10), 1797-1802.

Influence of Applied Load on Wear Characterizations of Rail Material

Journal of Applied Sciences, 2011, 11(9), 1636-1641.

Four-Ball Study of Tricresyl Phosphate Effect to Jatropha Oil for Transmission Oil Application

Journal of Applied Sciences, 2012, 12(24), 2503-2510.

Design of Tools for Stamping in Reactive Powder Concrete for Thin Sheets

Journal of Applied Sciences, 2006, 6(14), 2927-2931.

Investigation of Tribological Properties of Brake Pads by Using Rice Straw and Rice Husk Dust

Journal of Applied Sciences, 2009, 9(2), 377-381. DOI:

Cited By


Machining of Cemented Tungsten Carbide using EDM

Journal of Applied Sciences, 2011, 11(10), 1784. DOI: 10.3923/jas.2011.1784.1790