Research Article 
Optimization of a Heavy Continuous Rolling Mill System Via Simulation
Journal of Applied Sciences, 2006, 6(3), 611-615.
Abstract
The objective of this study was to develop an integrated simulation model, which generates a set of optimizing alternatives for a heavy continuous rolling mill system in a full-scale steelmaking factory. The simulation approach enabled us to evaluate the performance of the existing system and pinpointed existing bottlenecks in workstations and production flow. Consequently, it generated a set of optimum production alternatives. Data related to process and operation times, repairs, maintenance and quality control were collected and analyzed systematically. The simulation model was modeled by Visual SLAM and Awesim simulation language. The results and structure of the computer simulation model were validated and verified against the actual system. Also, the results of the models were discussed and approved by the production managers. The distinct feature of the simulation model is three fold. First, it is integrated and considers detailed operations and activities of the Rolling Mill system. Furthermore, it is designed to be integrated with other workshops of the factory. Second, it locates the optimum solutions by a rule-based methodology. Finally, the model considers the Just-in-Time configuration of the line and is capable of answering all production and inventory issues.
ASCI-ID: 35-1127
Similar Articles
A Genetic Algorithm to Solve the Maximum Partition Problem
Journal of Applied Sciences, 2002, 2(1), 71-73.
Simulation Based Analysis of Erbium Doped Amplifier (EDFA)Journal of Applied Sciences, 2006, 6(4), 789-794.
The Optimal Method of Nonlinear Decoding for Nonlinear Encoding of QAM SignalJournal of Applied Sciences, 2006, 6(10), 2292-2296.
EPQ Models under Permissible Payment Delay: An Algebraic ApproachJournal of Applied Sciences, 2007, 7(4), 515-518.
Optimization of a Novel Nitric Oxide Sensor Using a Latex Rubber MatrixJournal of Applied Sciences, 2007, 7(23), 3801-3805.
A Genetic Approach to Optimize Mathematical Model of Facilities Relocation Problem in Supply ChainJournal of Applied Sciences, 2008, 8(18), 3119-3128.
Multi-Objective Differential Evolution Algorithm for Solving Engineering ProblemsJournal of Applied Sciences, 2009, 9(20), 3652-3661.
Optimization of the Artificial Neural Networks UsingAnt Colony Algorithm to Predict the Variation of Stock Price IndexJournal of Applied Sciences, 2010, 10(3), 221-225.
Carboxymethylation of Cassava Starch in Different Solvents and Solvent-Water Mixtures: Optimization of Reaction ConditionsJournal of Applied Sciences, 2008, 8(8), 1581-1585.
PFPSO: An Optimised Filtering Approach Based on SamplingJournal of Applied Sciences, 2010, 10(6), 494-499.
A Novel Optimized Neural Network Model for Cost Estimation using Genetic AlgorithmJournal of Applied Sciences, 2010, 10(6), 512-516.
Determining an Optimum Model for Production in Paper Industry: Case Study of Iranian Mazandaran Wood and Paper IndustriesJournal of Applied Sciences, 2007, 7(20), 3075-3080.
New Method for Finding an Optimal Solution to Quadratic Programming ProblemsJournal of Applied Sciences, 2010, 10(15), 1627-1631.
Machining of Nickel Alloy 242 with Cubic Boron Nitride ToolsJournal of Applied Sciences, 2010, 10(19), 2322-2327.
Response Surface Methodology Study on Removal of Humic Acid from Aqueous Solutions Using Anionic Clay HydrotalciteJournal of Applied Sciences, 2010, 10(19), 2297-2303.
Improved Evolving Kernel of Fisher’s Discriminant Analysis for Classification ProblemJournal of Applied Sciences, 2009, 9(12), 2313-2318.
Multiple Performance Optimization for the Best Metal Injection Molding Green CompactJournal of Applied Sciences, 2011, 11(9), 1663-1667.
Destabilization of Heavy and Light Crude Oil Emulsions via Microwave Heating Technology: An Optimization StudyJournal of Applied Sciences, 2011, 11(16), 2898-2906.
Optimization by Grey Relational Analysis of EDM Parameters in Machining Al-15% SiC MMC Using Multihole ElectrodeJournal of Applied Sciences, 2012, 12(10), 963-970.
Optimization of Oxytetracycline Degradation Inside UV/H2O2 Reactor Using Box-Behnken Experimental DesignJournal of Applied Sciences, 2012, 12(11), 1154-1159.
Optimal Capacity and Placement of Wind Power Generation System Under Wind Speed Uncertainties: A ReviewJournal of Applied Sciences, 2012, 12(20), 2107-2114.
A Hybrid Simulated Annealing with Solutions Memory for Curriculum-based Course Timetabling ProblemJournal of Applied Sciences, 2013, 13(2), 262-269.
Optimization of Multilevel Image Thresholding Using the Bees AlgorithmJournal of Applied Sciences, 2013, 13(3), 458-464.
Optimization of Process Parameter Variability in 45 nm PMOS Device using Taguchi MethodJournal of Applied Sciences, 2011, 11(7), 1261-1266.
Optimization of Hybrid Solar and Wind Power GenerationJournal of Applied Sciences, 2013, 13(6), 869-875.
Evaluation and Optimization of Children's Recreational Center in Urban Green Public Space Based on AHP-TOPSISJournal of Applied Sciences, 2013, 13(6), 895-900.
A Review of Mathematical Model Describing Insulin Delivery System for Type 1 DiabetesJournal of Applied Sciences, 2014, 14(13), 1465-1468.
Dynamics Simulation and Optimization of Ride Comfort for Car on Random RoadJournal of Applied Sciences, 2013, 13(15), 3035-3041.
A Semi-Markov Process based Optimization Method for Availability of Hybrid Flow ShopJournal of Applied Sciences, 2013, 13(16), 3340-3344.
Coordination and Optimization of Supply Chain under a New Buy-back ContractJournal of Applied Sciences, 2013, 13(17), 3543-3547.
Study on the Delivery Area Optimization and ManagementJournal of Applied Sciences, 2013, 13(18), 3730-3735.
Optimization of Design Proposal of Community Environment Landscape based on ANP ModelJournal of Applied Sciences, 2013, 13(7), 1123-1127.
Economic Optimization Mathematical Model of the Public Building Canopy StructureJournal of Applied Sciences, 2013, 13(21), 4738-4743.
Planning a Nutritious and Healthy Menu For Malaysian School Children Aged 13-18 Using "Delete-reshuffle Algorithm" in Binary Integer ProgrammingJournal of Applied Sciences, 2015, 15(10), 1239-1244.
Genetic Algorithms in Optimization and Computer Aided DesignJournal of Applied Sciences, 2001, 1(3), 289-294.
The Influence of Process Parameters on Lactic Acid Fermentation in Laboratory Scale FermenterJournal of Applied Sciences, 2006, 6(10), 2287-2291.
Optimization of Reservoir Operation by Genetic Algorithm Considering Inflow Probabilities (Case Study: The Jiroft Dam Reservoir)Journal of Applied Sciences, 2008, 8(11), 2173-2177.
A New Algorithm for Optimum Design of Mechanical Draft Wet Cooling TowersJournal of Applied Sciences, 2009, 9(3), 561-566.
A Heuristic Traditional MIP Solving Approach for Long Term Production Scheduling in Open Pit MineJournal of Applied Sciences, 2008, 8(24), 4512-4522.
Intelligent System for Continuous Gas Lift Operation and Design with Unlimited Gas SupplyJournal of Applied Sciences, 2009, 9(10), 1889-1897.
A Two-Step Biodiesel Production from Waste Cooking Oil: Optimization of Pre-Treatment StepJournal of Applied Sciences, 2009, 9(17), 3098-3103.
Biodiesel Production from Crude Palm Oil by Transesterification ProcessJournal of Applied Sciences, 2009, 9(17), 3166-3170.
Neural Network for Farm Household Output PredictionJournal of Applied Sciences, 2016, 16(12), 594-599.
Optimization of Physical Conditions of Actinokinase Synthesis from Local Isolate Using Response Surface Methodology (RSM)Journal of Applied Sciences, 2020, 20(1), 35-43.
Development of a Sustainable Integrated Process Design and Control for Chemical ProcessesJournal of Applied Sciences, 2014, 14(12), 1277-1282.
Development of Artificial Neural Network for Optimisation of Reusability in Automotive ComponentsJournal of Applied Sciences, 2011, 11(6), 996-1003.
Slub Yarn Quality Optimization by using Desirability Function and Neural NetworksJournal of Applied Sciences, 2011, 11(17), 3204-3208.
Optimal Computerized Model for Designing Cellular Manufacturing Systems using Neural NetworkJournal of Applied Sciences, 2011, 11(15), 2837-2842.
Response Surface Methodology Approach to Optimizing Process Variables for the Densification of Rice Straw as a Rural Alternative Solid FuelJournal of Applied Sciences, 2011, 11(7), 1192-1198.
A Solution for Time-Dependent Multimodal Shortest Path ProblemJournal of Applied Sciences, 2009, 9(21), 3804-3812.
Optimization of the Hardened Concrete Properties with GA and LPJournal of Applied Sciences, 2007, 7(24), 3918-3926.
Modelling of Magnetic Proprieties of FeNb Coatings Produced by HVOF Thermal SprayingJournal of Applied Sciences, 2007, 7(3), 386-391.
Sequential and Parallel Genetic Algorithms for the Hybrid Flow Shop Scheduling ProblemJournal of Applied Sciences, 2006, 6(4), 775-778.
An Algebraically Derived Minimal Cost Solution Technique of the EOQ Model Under Conditional Trade CreditJournal of Applied Sciences, 2006, 6(4), 750-754.
Digital Circuit Structure Design via Evolutionary Algorithm MethodJournal of Applied Sciences, 2007, 7(3), 380-385.
A Deterministic Inventory Model under Quantity-depended Payments Delay Policy Using Algebraic MethodJournal of Applied Sciences, 2006, 6(2), 406-410.
The Economic-environmental Neural Network Model for Electrical Power DispatchingJournal of Applied Sciences, 2004, 4(3), 340-343.
Wireless Remote Monitoring System for the Agc Svibration Fault of Rolling MillJournal of Applied Sciences, 2013, 13(21), 4875-4880.
Operation and Simulation of a Water Supply SystemJournal of Applied Sciences, 2002, 2(6), 702-709.
Simulation, Testing and Sensitivity Analysis of Fuel Pressure Regulator for MPFI Paykan 1600 cc EngineJournal of Applied Sciences, 2005, 5(4), 781-786.
System Dynamics Simulation Based Analysis of Effect of Some External Conditions on Development of Natural Gas VehiclesJournal of Applied Sciences, 2005, 5(9), 1636-1644.
Spatio-temporal Simulation of a MicrojunctionJournal of Applied Sciences, 2006, 6(9), 1959-1965.
Mathematical Modeling of Alkali Metal Ions in Aqueous SystemJournal of Applied Sciences, 2007, 7(12), 1656-1660.
Steady State Simulation of a Fluid Catalytic Cracking UnitJournal of Applied Sciences, 2007, 7(15), 2137-2145.
An Algorithm for Modeling and Simulation of Microalgea ProductionJournal of Applied Sciences, 2007, 7(19), 2848-2855.
Simulation of Nitrogen Distribution in Soil with Drip Irrigation SystemJournal of Applied Sciences, 2008, 8(18), 3157-3165.
The Role of Integrated Water Management in Watershed Flood ManagementJournal of Applied Sciences, 2008, 8(21), 3854-3862.
Macroeconomic Policies and the Best Environmental-Oriented Policy in Agricultural sector of Iran (Case of Soil Erosion)Journal of Applied Sciences, 2009, 9(2), 387-391. DOI:
Simulation of Three Different Double-Fiber Probes for Reflection SensingJournal of Applied Sciences, 2010, 10(1), 20-28.
Effect of Age of Pipes on Performance of Natural Gas Transmission Pipeline Network SystemJournal of Applied Sciences, 2011, 11(9), 1612-1617.
Ideal and non Ideal Condition Analysis based on Protection Scheme in Distribution Fiber for Immediate Split Ftth-ponJournal of Applied Sciences, 2011, 11(6), 1026-1032.
Numerical Simulation of Unsteady Flow to Show Self-starting of Vertical Axis Wind Turbine Using FluentJournal of Applied Sciences, 2011, 11(6), 962-970.
Simulation of Oxygen-steam Gasification with CO2 Adsorption for Hydrogen Production from Empty Fruit BunchJournal of Applied Sciences, 2011, 11(12), 2171-2178.
The Combustion Behavior Analysis of Dual Fuel HCCI using the Shell ModelJournal of Applied Sciences, 2011, 11(9), 1559-1565.
RFID-Based Clinical Decision Support System using Simulation ModelingJournal of Applied Sciences, 2011, 11(15), 2808-2815.
Object-oriented Programming Strategies for Numerical Solvers Applied to Continuous SimulationJournal of Applied Sciences, 2011, 11(15), 2723-2733.
Simulation of Crack Growth Rate in Martensitic SteelJournal of Applied Sciences, 2007, 7(2), 302-305.
Modeling and Simulation of Thermal Transfer in Batch ReactorJournal of Applied Sciences, 2006, 6(6), 1327-1331.
Determination of the Probability Plotting Position for Type I Extreme Value DistributionJournal of Applied Sciences, 2012, 12(14), 1501-1506.
Process Simulation of Two-stage Evaporation and Crystallization Systems for Bis(2-hydroxyethyl) terephthalate RecoveryJournal of Applied Sciences, 2012, 12(15), 1547-1555.
A Study on Reduction of Cooling Energy in Glazed BuildingsJournal of Applied Sciences, 2012, 12(23), 2436-2441.
PMSM Sensorless Vector Control Based on Instantaneous Power Angle DetectionJournal of Applied Sciences, 2013, 13(9), 1636-1641.
Research on Seismic Data Denoising Method by Wavelet Packet TransformJournal of Applied Sciences, 2013, 13(15), 2903-2908.
Study on Robot Search Gas Leakage Source by Entropy and Its SimulationJournal of Applied Sciences, 2013, 13(15), 3007-3019.
Dynamics Simulation and Optimization of Ride Comfort for Car on Random RoadJournal of Applied Sciences, 2013, 13(15), 3035-3041.
The Study for the Emergency Management of Evacuation Imitation along the Commercial Pedestrian StreetJournal of Applied Sciences, 2013, 13(15), 3104-3109.
Two-tiered Decentralized Simulation Model to Regulate Urban Freight Trucks OperationJournal of Applied Sciences, 2013, 13(16), 3275-3279.
Drop and Pull Transport Based on One Vehicle with Dual Use in Automotive LogisticsJournal of Applied Sciences, 2013, 13(17), 3380-3386.
Design and Implementation of a Biomass Temporal-spatial Variation Simulate SystemJournal of Applied Sciences, 2013, 13(17), 3439-3445.
Calculation and Simulation of Probabilities of Matching Birthdays with Certain ConditionsJournal of Applied Sciences, 2013, 13(18), 3757-3761.
Study of Braking Energy Recovery for Electric Bus Based on the AMESimJournal of Applied Sciences, 2013, 13(22), 5327-5334.
Control Strategy for Starting and Acceleration of Pure Electric VehicleJournal of Applied Sciences, 2013, 13(22), 5356-5362.
Design of the Three Gorges Ship Elevator’s Gate Water Seal and Seal’s Working Performance AnalysisJournal of Applied Sciences, 2013, 13(22), 5391-5397.
Improved Immune Clonal Selection Algorithm for Photovoltaic Maximum Power Point Tracking ControlJournal of Applied Sciences, 2013, 13(22), 5377-5383.
Research on Characteristic of Capacitor under Strong StressJournal of Applied Sciences, 2013, 13(22), 5483-5487.
Structural Design and Simulation of Torsion-free-body of Petroleum TankerJournal of Applied Sciences, 2013, 13(23), 5568-5571.
Simulation of Phenol Adsorption in a Packed Bed ColumnJournal of Applied Sciences, 2014, 14(23), 3249-3255.
Dynamic Simulation of Hydrogen Sulfide Adsorption in a Packed Bed Column of Activated CarbonJournal of Applied Sciences, 2014, 14(23), 3294-3299.
Development and Simulation of an Absorber for Small-size Libr-H2O Absorption Refrigeration MachinesJournal of Applied Sciences, 2003, 3(5), 305-316.
A Modified Two-Stage Method for Combining the Aggregate-Data and Individual-Patient-Data in Meta-AnalysisJournal of Applied Sciences, 2015, 15(10), 1231-1238.
Modeling and Simulation of Dynamic SystemsJournal of Applied Sciences, 2006, 6(4), 950-954.
Bayesian Regression with Prior Non-sample Information on Mash YieldJournal of Applied Sciences, 2005, 5(1), 187-191.
Non-linear Solution of Function Generation of Planar Four-link Mechanisms by Homotopy Continuation MethodJournal of Applied Sciences, 2005, 5(4), 724-728.
Required Hospital Beds Estimation: A Simulation StudyJournal of Applied Sciences, 2005, 5(7), 1189-1191.
Experimental Simulation of the Fouling in a Cylindrical Control by MilkJournal of Applied Sciences, 2008, 8(11), 2187-2190.
Sensitivity Study of PADC Track Detector with External RadiatorsJournal of Applied Sciences, 2010, 10(23), 3127-3131.
Modeling and Nonlinearity Studies of Industrial i-Butane/n-Butane Distillation ColumnJournal of Applied Sciences, 2011, 11(3), 494-502.
Neural Networks Based Modelling of Traffic Accidents in Interurban Rural Highways, Duzce SamplingJournal of Applied Sciences, 2008, 8(1), 146-151.
Reconstruction of Time Series Data with Missing ValuesJournal of Applied Sciences, 2007, 7(6), 922-925.
Leaching Requirements to Prevent Soil SalinizationJournal of Applied Sciences, 2006, 6(7), 1481-1489.
Dynamic Simulation and Nonlinear Vibrations of Flexible Robot ArmsJournal of Applied Sciences, 2003, 3(7), 510-523.
A Compiler Driven Simulation Technique for the Analysis of Digital Logic CircuitJournal of Applied Sciences, 2005, 5(8), 1466-1469.
A Simulation Technique For Engineering Control SystemsJournal of Applied Sciences, 2006, 6(1), 157-162.
Computer-aided Deflection and Slope Analyses of BeamsJournal of Applied Sciences, 2006, 6(2), 333-339.
Cited By
A simulation optimisation approach for real-time scheduling in an open shop environment using a composite dispatching rule
International Journal of Computer Integrated Manufacturing, 2017, 30(12), 1239. DOI: 10.1080/0951192X.2017.1307452
Multi-objective simulation optimization for uncertain resource assignment and job sequence in automated flexible job shopApplied Soft Computing, 2019, 75(), 190. DOI: 10.1016/j.asoc.2018.11.015